KUBUNTU 7.10
dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000eb400 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 448MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 114688) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114688
[ 0.000000] HighMem 114688 -> 114688
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114688
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 864 pages used for memmap
[ 0.000000] Normal zone: 109728 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3f80000)
[ 0.000000] Built 1 zonelists. Total pages: 113792
[ 0.000000] Kernel command line: root=UUID=8b1c8620-c2b5-435c-a582-526a2ac27055 ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0138c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 397.351 MHz processor.
[ 48.197163] Console: colour VGA+ 80x25
[ 48.198454] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 48.199763] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 48.265895] Memory: 443020k/458752k available (2015k kernel code, 15208k reserved, 916k data, 364k init, 0k highmem)
[ 48.265947] virtual kernel memory layout:
[ 48.265953] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 48.265961] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 48.265968] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 48.265976] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 48.265983] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 48.265990] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 48.265998] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 48.266015] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 48.266180] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 48.346224] Calibrating delay using timer specific routine.. 795.69 BogoMIPS (lpj=1591396)
[ 48.346341] Security Framework v1.0.0 initialized
[ 48.346377] SELinux: Disabled at boot.
[ 48.346453] Mount-cache hash table entries: 512
[ 48.346998] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 48.347050] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 48.347064] CPU: L2 cache: 512K
[ 48.347077] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 48.347129] Compat vDSO mapped to ffffe000.
[ 48.347186] Checking 'hlt' instruction... OK.
[ 48.362352] SMP alternatives: switching to UP code
[ 48.363054] Freeing SMP alternatives: 11k freed
[ 48.364245] Early unpacking initramfs... done
[ 50.034128] CPU0: Intel Pentium II (Deschutes) stepping 02
[ 50.034156] SMP motherboard not detected.
[ 50.034168] Local APIC not detected. Using dummy APIC emulation.
[ 50.034413] Brought up 1 CPUs
[ 50.034975] Booting paravirtualized kernel on bare hardware
[ 50.035181] Time: 17:02:13 Date: 05/05/108
[ 50.035305] NET: Registered protocol family 16
[ 50.035738] EISA bus registered
[ 50.036676] PCI: PCI BIOS revision 2.10 entry at 0xfd9c2, last bus=1
[ 50.036690] PCI: Using configuration type 1
[ 50.036699] Setting up standard PCI resources
[ 50.041582] ACPI: Interpreter disabled.
[ 50.041601] Linux Plug and Play Support v0.97 © Adam Belay
[ 50.041643] pnp: PnP ACPI: disabled
[ 50.041655] PnPBIOS: Scanning system for PnP BIOS support...
[ 50.041733] PnPBIOS: Found PnP BIOS installation structure at 0xc00f7210
[ 50.041750] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb2cd, dseg 0x400
[ 50.051228] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
[ 50.051497] PCI: Probing PCI hardware
[ 50.051516] PCI: Probing PCI hardware (bus 00)
[ 50.052091] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 50.052100] * this clock source is slow. Consider trying other clock sources
[ 50.052175] PCI quirk: region 8000-803f claimed by PIIX4 ACPI
[ 50.052190] PCI quirk: region 2180-218f claimed by PIIX4 SMB
[ 50.054745] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:04.0
[ 50.056479] NET: Registered protocol family 8
[ 50.056492] NET: Registered protocol family 20
[ 50.056791] pnp: 00:00: ioport range 0x8400-0x8403 has been reserved
[ 50.056810] pnp: 00:00: ioport range 0x8404-0x8407 has been reserved
[ 50.056826] pnp: 00:00: ioport range 0x8408-0x8409 has been reserved
[ 50.056841] pnp: 00:00: ioport range 0x8410-0x841f has been reserved
[ 50.056860] pnp: 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
[ 50.056891] pnp: 00:01: iomem range 0x0-0x9ffff could not be reserved
[ 50.056907] pnp: 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 50.056923] pnp: 00:01: iomem range 0x100000-0x1bffffff could not be reserved
[ 50.056967] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 50.056983] pnp: 00:0a: ioport range 0x8000-0x803f has been reserved
[ 50.056998] pnp: 00:0a: ioport range 0x2180-0x218f has been reserved
[ 50.058190] Time: tsc clocksource has been installed.
[ 50.059060] PCI: Bridge: 0000:00:01.0
[ 50.059071] IO window: disabled.
[ 50.059088] MEM window: fe000000-fecfffff
[ 50.059103] PREFETCH window: f6000000-f6ffffff
[ 50.059170] NET: Registered protocol family 2
[ 50.098416] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 50.098640] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 50.099475] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 50.100049] TCP: Hash tables configured (established 16384 bind 16384)
[ 50.100063] TCP reno registered
[ 50.110777] checking if image is initramfs... it is
[ 53.304965] Freeing initrd memory: 7347k freed
[ 53.306387] audit: initializing netlink socket (disabled)
[ 53.306441] audit(1212685335.796:1): initialized
[ 53.319787] VFS: Disk quotas dquot_6.5.1
[ 53.320135] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 53.320957] io scheduler noop registered
[ 53.320972] io scheduler anticipatory registered
[ 53.320983] io scheduler deadline registered
[ 53.321114] io scheduler cfq registered (default)
[ 53.321155] Limiting direct PCI/PCI transfers.
[ 53.321216] Boot video device is 0000:01:00.0
[ 53.321840] isapnp: Scanning for PnP cards...
[ 53.446591] isapnp: Card 'AZT1008 PnP SOUND DEVICE'
[ 53.446606] isapnp: 1 Plug & Play card detected total
[ 53.618376] Real Time Clock Driver v1.12ac
[ 53.618800] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 53.619017] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 53.622402] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 53.626976] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 53.627686] input: Macintosh mouse button emulation as /class/input/input0
[ 53.628193] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 53.630955] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 53.630982] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 53.631968] mice: PS/2 mouse device common for all mice
[ 53.632605] EISA: Probing bus 0 at eisa.0
[ 53.632685] Cannot allocate resource for EISA slot 8
[ 53.632696] EISA: Detected 0 cards.
[ 53.633150] TCP cubic registered
[ 53.633227] NET: Registered protocol family 1
[ 53.633342] Using IPI No-Shortcut mode
[ 53.633697] Magic number: 12:139:36
[ 53.635713] Freeing unused kernel memory: 364k freed
[ 53.690271] input: AT Translated Set 2 keyboard as /class/input/input1
[ 55.602081] Clocksource tsc unstable (delta = 568036012 ns)
[ 55.606065] Time: pit clocksource has been installed.
[ 56.040381] AppArmor: AppArmor initialized<5>audit(1212685338.344:2): type=1505 info="AppArmor initialized" pid=1123
[ 56.176582] fuse init (API version 7.8)
[ 56.204518] Failure registering capabilities with primary security module.
[ 56.302817] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 58.796256] SCSI subsystem initialized
[ 58.965847] libata version 2.21 loaded.
[ 58.983543] ata_piix 0000:00:04.1: version 2.11
[ 58.984229] scsi0 : ata_piix
[ 58.984450] scsi1 : ata_piix
[ 58.984598] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fcf0 irq 14
[ 58.984618] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fcf8 irq 15
[ 59.053602] 8139too Fast Ethernet driver 0.9.28
[ 59.154527] ata1.00: ATA-5: ST310212A, 3.39, max UDMA/66
[ 59.154548] ata1.00: 19541088 sectors, multi 16: LBA
[ 59.159403] ata1.01: ATA-4: IBM-DTTA-350640, T54MA74A, max UDMA/33
[ 59.159420] ata1.01: 12594960 sectors, multi 16: LBA
[ 59.174488] ata1.00: configured for UDMA/33
[ 59.214831] ata1.01: configured for UDMA/33
[ 59.498778] usbcore: registered new interface driver usbfs
[ 59.498893] usbcore: registered new interface driver hub
[ 59.499039] usbcore: registered new device driver usb
[ 59.507284] USB Universal Host Controller Interface driver v3.0
[ 59.542255] ata2.00: ATAPI: Hewlett-Packard CD-Writer Plus 9100, 1.0c, max UDMA/33
[ 59.714247] ata2.00: configured for UDMA/33
[ 59.722090] scsi 0:0:0:0: Direct-Access ATA ST310212A 3.39 PQ: 0 ANSI: 5
[ 59.730085] scsi 0:0:1:0: Direct-Access ATA IBM-DTTA-350640 T54M PQ: 0 ANSI: 5
[ 59.735090] scsi 1:0:0:0: CD-ROM HP CD-Writer+ 9100 1.0c PQ: 0 ANSI: 5
[ 59.753210] PCI: setting IRQ 10 as level-triggered
[ 59.753228] PCI: Found IRQ 10 for device 0000:00:0e.0
[ 59.753777] eth0: RealTek RTL8139 at 0xdc80cc00, 00:40:05:89:f9:2a, IRQ 10
[ 59.753792] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 59.755141] PCI: setting IRQ 11 as level-triggered
[ 59.755157] PCI: Found IRQ 11 for device 0000:00:04.2
[ 59.755204] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 59.755637] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 59.755704] uhci_hcd 0000:00:04.2: irq 11, io base 0x0000fca0
[ 59.756303] usb usb1: configuration #1 chosen from 1 choice
[ 59.756460] hub 1-0:1.0: USB hub found
[ 59.756507] hub 1-0:1.0: 2 ports detected
[ 60.000964] Floppy drive(s): fd0 is 1.44M
[ 60.027850] FDC 0 is a National Semiconductor PC87306
[ 60.378901] sd 0:0:0:0: [sda] 19541088 512-byte hardware sectors (10005 MB)
[ 60.378983] sd 0:0:0:0: [sda] Write Protect is off
[ 60.379000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 60.379116] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 60.379384] sd 0:0:0:0: [sda] 19541088 512-byte hardware sectors (10005 MB)
[ 60.379454] sd 0:0:0:0: [sda] Write Protect is off
[ 60.379470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 60.379584] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 60.379612] sda: sda1 sda2 < sda5 >
[ 60.515224] sd 0:0:0:0: [sda] Attached SCSI disk
[ 60.516188] sd 0:0:1:0: [sdb] 12594960 512-byte hardware sectors (6449 MB)
[ 60.516265] sd 0:0:1:0: [sdb] Write Protect is off
[ 60.516281] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 60.516398] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 60.516643] sd 0:0:1:0: [sdb] 12594960 512-byte hardware sectors (6449 MB)
[ 60.516713] sd 0:0:1:0: [sdb] Write Protect is off
[ 60.516729] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 60.516841] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 60.516860] sdb: sdb1 sdb2 < sdb5 >
[ 60.553100] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 60.561576] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 60.561595] Uniform CD-ROM driver Revision: 3.20
[ 60.562523] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 60.592995] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 60.593800] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 60.594816] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 61.653911] Attempting manual resume
[ 61.654008] swsusp: Resume From Partition 8:5
[ 61.654019] PM: Checking swsusp image.
[ 61.677149] PM: Resume from disk failed.
[ 61.804438] kjournald starting. Commit interval 5 seconds
[ 61.804488] EXT3-fs: mounted filesystem with ordered data mode.
[ 78.368774] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 78.381152] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 79.630141] piix4_smbus 0000:00:04.3: Found 0000:00:04.3 device
[ 81.825743] Linux agpgart interface v0.102 © Dave Jones
[ 83.480786] agpgart: Detected an Intel 440BX Chipset.
[ 83.490474] agpgart: AGP aperture is 64M @ 0xf8000000
[ 84.054847] pnp: Device 01:01.03 activated.
[ 84.072008] gameport: NS558 PnP Gameport is pnp01:01.03/gameport0, io 0x200, speed 685kHz
[ 84.210834] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[ 84.213964] parport_pc 00:0f: reported by Plug and Play BIOS
[ 84.214087] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 84.216099] input: PC Speaker as /class/input/input3
[ 86.824094] lp0: using parport0 (interrupt-driven).
[ 87.905815] pnp: Device 01:01.01 activated.
[ 87.908108] pnp: Device 01:01.02 activated.
[ 88.227784] Adding 465844k swap on /dev/sda5. Priority:-1 extents:1 across:465844k
[ 88.686965] EXT3 FS on sda1, internal journal
[ 92.822889] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 92.823333] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 92.824634] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 92.825283] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 96.601655] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 97.507221] ppdev: user-space parallel port driver
[ 99.062320] audit(1212685382.261:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4352 profile="/usr/sbin/cupsd"
[ 99.689237] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 105.117962] Failure registering capabilities with primary security module.
[ 106.634343] Bluetooth: Core ver 2.11
[ 106.634830] NET: Registered protocol family 31
[ 106.634847] Bluetooth: HCI device and connection manager initialized
[ 106.634863] Bluetooth: HCI socket layer initialized
[ 106.693773] Bluetooth: L2CAP ver 2.8
[ 106.693792] Bluetooth: L2CAP socket layer initialized
[ 106.948244] Bluetooth: RFCOMM socket layer initialized
[ 106.948669] Bluetooth: RFCOMM TTY layer initialized
[ 106.948685] Bluetooth: RFCOMM ver 1.8
[ 110.749857] NET: Registered protocol family 17
[ 118.588971] NET: Registered protocol family 10
[ 118.589516] lo: Disabled Privacy Extensions
[ 129.364403] eth0: no IPv6 routers present
saturnina@saturnina:~$
UBUNTU 8.04
dmesg
soliluna@soliluna-desktop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-17-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 1 14:31:33 UTC 2008 (Ubuntu 2.6.24-17.31-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000eb400 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 448MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 114688) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114688
[ 0.000000] HighMem 114688 -> 114688
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114688
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 864 pages used for memmap
[ 0.000000] Normal zone: 109728 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3f80000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ec000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000ec000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: root=UUID=52014b68-99b1-4ac1-b28b-61fe145fb8ad ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0138c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 397.340 MHz processor.
[ 47.821666] Console: colour VGA+ 80x25
[ 47.821686] console [tty0] enabled
[ 47.823004] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 47.824307] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 47.891951] Memory: 442756k/458752k available (2176k kernel code, 15400k reserved, 1007k data, 368k init, 0k highmem)
[ 47.891993] virtual kernel memory layout:
[ 47.891999] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 47.892006] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 47.892014] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 47.892021] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 47.892028] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 47.892035] .data : 0xc0320134 - 0xc041bdc4 (1007 kB)
[ 47.892042] .text : 0xc0100000 - 0xc0320134 (2176 kB)
[ 47.892058] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 47.892207] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 47.972255] Calibrating delay using timer specific routine.. 795.81 BogoMIPS (lpj=1591622)
[ 47.972376] Security Framework initialized
[ 47.972411] SELinux: Disabled at boot.
[ 47.972477] AppArmor: AppArmor initialized
[ 47.972497] Failure registering capabilities with primary security module.
[ 47.972539] Mount-cache hash table entries: 512
[ 47.973073] Initializing cgroup subsys ns
[ 47.973093] Initializing cgroup subsys cpuacct
[ 47.973134] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 47.973186] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 47.973199] CPU: L2 cache: 512K
[ 47.973213] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
[ 47.973265] Compat vDSO mapped to ffffe000.
[ 47.973322] Checking 'hlt' instruction... OK.
[ 47.988408] SMP alternatives: switching to UP code
[ 47.994306] Freeing SMP alternatives: 11k freed
[ 47.994806] Early unpacking initramfs... done
[ 49.697010] CPU0: Intel Pentium II (Deschutes) stepping 02
[ 49.697041] SMP motherboard not detected.
[ 49.697053] Local APIC not detected. Using dummy APIC emulation.
[ 49.697318] Brought up 1 CPUs
[ 49.697408] CPU0 attaching sched-domain:
[ 49.697422] domain 0: span 01
[ 49.697431] groups: 01
[ 49.698405] net_namespace: 64 bytes
[ 49.698426] Booting paravirtualized kernel on bare hardware
[ 49.701306] Time: 16:11:20 Date: 06/05/08
[ 49.701446] NET: Registered protocol family 16
[ 49.702942] EISA bus registered
[ 49.703867] PCI: PCI BIOS revision 2.10 entry at 0xfd9c2, last bus=1
[ 49.703880] PCI: Using configuration type 1
[ 49.703890] Setting up standard PCI resources
[ 49.710592] ACPI: Interpreter disabled.
[ 49.710609] Linux Plug and Play Support v0.97 © Adam Belay
[ 49.710839] pnp: PnP ACPI: disabled
[ 49.710854] PnPBIOS: Scanning system for PnP BIOS support...
[ 49.710924] PnPBIOS: Found PnP BIOS installation structure at 0xc00f7210
[ 49.710940] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb2cd, dseg 0x400
[ 49.720725] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
[ 49.722401] PCI: Probing PCI hardware
[ 49.722421] PCI: Probing PCI hardware (bus 00)
[ 49.723012] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 49.723022] * this clock source is slow. Consider trying other clock sources
[ 49.723096] PCI quirk: region 8000-803f claimed by PIIX4 ACPI
[ 49.723110] PCI quirk: region 2180-218f claimed by PIIX4 SMB
[ 49.726076] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:04.0
[ 49.740288] NET: Registered protocol family 8
[ 49.740300] NET: Registered protocol family 20
[ 49.740664] AppArmor: AppArmor Filesystem Enabled
[ 49.740910] system 00:00: ioport range 0x8400-0x8403 has been reserved
[ 49.740929] system 00:00: ioport range 0x8404-0x8407 has been reserved
[ 49.740944] system 00:00: ioport range 0x8408-0x8409 has been reserved
[ 49.740959] system 00:00: ioport range 0x8410-0x841f has been reserved
[ 49.740979] system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
[ 49.741016] system 00:01: iomem range 0x0-0x9ffff could not be reserved
[ 49.741032] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 49.741048] system 00:01: iomem range 0x100000-0x1bffffff could not be reserved
[ 49.741095] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 49.741111] system 00:0a: ioport range 0x8000-0x803f has been reserved
[ 49.741126] system 00:0a: ioport range 0x2180-0x218f has been reserved
[ 49.743928] PCI: Bridge: 0000:00:01.0
[ 49.743940] IO window: disabled.
[ 49.743956] MEM window: fe000000-fecfffff
[ 49.743969] PREFETCH window: f6000000-f6ffffff
[ 49.744035] NET: Registered protocol family 2
[ 49.744216] Time: tsc clocksource has been installed.
[ 49.776633] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 49.777881] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 49.778438] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 49.778995] TCP: Hash tables configured (established 16384 bind 16384)
[ 49.779008] TCP reno registered
[ 49.788832] checking if image is initramfs... it is
[ 53.041628] Freeing initrd memory: 7275k freed
[ 53.044494] audit: initializing netlink socket (disabled)
[ 53.044551] audit(1212682283.156:1): initialized
[ 53.059060] VFS: Disk quotas dquot_6.5.1
[ 53.059555] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 53.060678] io scheduler noop registered
[ 53.060693] io scheduler anticipatory registered
[ 53.060703] io scheduler deadline registered
[ 53.060790] io scheduler cfq registered (default)
[ 53.060831] Limiting direct PCI/PCI transfers.
[ 53.060894] Boot video device is 0000:01:00.0
[ 53.062275] isapnp: Scanning for PnP cards...
[ 53.187268] isapnp: Card 'AZT1008 PnP SOUND DEVICE'
[ 53.187284] isapnp: 1 Plug & Play card detected total
[ 53.422228] Real Time Clock Driver v1.12ac
[ 53.422727] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 53.423142] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 53.426912] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 53.432556] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 53.432949] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 53.433629] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 53.436507] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 53.436534] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 53.444646] mice: PS/2 mouse device common for all mice
[ 53.445427] EISA: Probing bus 0 at eisa.0
[ 53.445503] Cannot allocate resource for EISA slot 8
[ 53.445514] EISA: Detected 0 cards.
[ 53.445528] cpuidle: using governor ladder
[ 53.445538] cpuidle: using governor menu
[ 53.446319] NET: Registered protocol family 1
[ 53.446464] Using IPI No-Shortcut mode
[ 53.446596] registered taskstats version 1
[ 53.446894] Magic number: 12:686:185
[ 53.447172] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 53.447183] EDD information not available.
[ 53.448964] Freeing unused kernel memory: 368k freed
[ 53.469455] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 54.976325] Clocksource tsc unstable (delta = 276039490 ns)
[ 54.990753] Time: pit clocksource has been installed.
[ 56.020910] fuse init (API version 7.9)
[ 56.186252] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 58.618961] SCSI subsystem initialized
[ 59.016325] usbcore: registered new interface driver usbfs
[ 59.016435] usbcore: registered new interface driver hub
[ 59.089491] usbcore: registered new device driver usb
[ 59.120130] 8139too Fast Ethernet driver 0.9.28
[ 59.120325] PCI: setting IRQ 10 as level-triggered
[ 59.120340] PCI: Found IRQ 10 for device 0000:00:0e.0
[ 59.121825] eth0: RealTek RTL8139 at 0xf800, 00:40:05:89:f9:2a, IRQ 10
[ 59.121842] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 59.371112] Floppy drive(s): fd0 is 1.44M
[ 59.388766] FDC 0 is a National Semiconductor PC87306
[ 59.391922] USB Universal Host Controller Interface driver v3.0
[ 59.392223] PCI: setting IRQ 11 as level-triggered
[ 59.392238] PCI: Found IRQ 11 for device 0000:00:04.2
[ 59.392293] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 59.392878] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 59.392943] uhci_hcd 0000:00:04.2: irq 11, io base 0x0000fca0
[ 59.393621] usb usb1: configuration #1 chosen from 1 choice
[ 59.393772] hub 1-0:1.0: USB hub found
[ 59.393808] hub 1-0:1.0: 2 ports detected
[ 59.396282] libata version 3.00 loaded.
[ 59.568653] ata_piix 0000:00:04.1: version 2.12
[ 59.572544] scsi0 : ata_piix
[ 59.574300] scsi1 : ata_piix
[ 59.574495] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14
[ 59.574511] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15
[ 59.760792] ata1.00: ATA-5: ST310212A, 3.39, max UDMA/66
[ 59.760813] ata1.00: 19541088 sectors, multi 16: LBA
[ 59.770862] ata1.01: ATA-4: IBM-DTTA-350640, T54MA74A, max UDMA/33
[ 59.770882] ata1.01: 12594960 sectors, multi 16: LBA
[ 59.784767] ata1.00: configured for UDMA/33
[ 59.826386] ata1.01: configured for UDMA/33
[ 60.144499] ata2.00: ATAPI: Hewlett-Packard CD-Writer Plus 9100, 1.0c, max UDMA/33
[ 60.316415] ata2.00: configured for UDMA/33
[ 60.316967] scsi 0:0:0:0: Direct-Access ATA ST310212A 3.39 PQ: 0 ANSI: 5
[ 60.317589] scsi 0:0:1:0: Direct-Access ATA IBM-DTTA-350640 T54M PQ: 0 ANSI: 5
[ 60.323004] scsi 1:0:0:0: CD-ROM HP CD-Writer+ 9100 1.0c PQ: 0 ANSI: 5
[ 61.653342] Driver 'sd' needs updating - please use bus_type methods
[ 61.653725] sd 0:0:0:0: [sda] 19541088 512-byte hardware sectors (10005 MB)
[ 61.653815] sd 0:0:0:0: [sda] Write Protect is off
[ 61.653832] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 61.653975] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 61.654240] sd 0:0:0:0: [sda] 19541088 512-byte hardware sectors (10005 MB)
[ 61.654323] sd 0:0:0:0: [sda] Write Protect is off
[ 61.654339] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 61.654481] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 61.654505] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 61.692385] sda5 >
[ 61.692838] sd 0:0:0:0: [sda] Attached SCSI disk
[ 61.693175] sd 0:0:1:0: [sdb] 12594960 512-byte hardware sectors (6449 MB)
[ 61.693267] sd 0:0:1:0: [sdb] Write Protect is off
[ 61.693284] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 61.693433] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 61.693690] sd 0:0:1:0: [sdb] 12594960 512-byte hardware sectors (6449 MB)
[ 61.693775] sd 0:0:1:0: [sdb] Write Protect is off
[ 61.693791] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 61.693938] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 61.693963] sdb: sdb1 sdb2 < sdb5 >
[ 61.727283] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 61.781275] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 61.781298] Uniform CD-ROM driver Revision: 3.20
[ 61.781524] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 61.802921] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 61.803032] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 61.803138] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 63.086152] Attempting manual resume
[ 63.086170] swsusp: Resume From Partition 8:21
[ 63.086179] PM: Checking swsusp image.
[ 63.104919] PM: Resume from disk failed.
[ 63.252524] kjournald starting. Commit interval 5 seconds
[ 63.252577] EXT3-fs: mounted filesystem with ordered data mode.
[ 94.595444] Linux agpgart interface v0.102
[ 94.807600] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 94.904782] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 94.983690] agpgart: Detected an Intel 440BX Chipset.
[ 94.993864] agpgart: AGP aperture is 64M @ 0xf8000000
[ 96.027473] piix4_smbus 0000:00:04.3: Found 0000:00:04.3 device
[ 96.145182] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 97.783967] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 101.408514] parport_pc 00:0f: reported by Plug and Play BIOS
[ 101.408639] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 102.861888] ns558 01:01.03: activated
[ 102.906484] gameport: NS558 PnP Gameport is pnp01:01.03/gameport0, io 0x200, speed 685kHz
[ 104.126777] sysfs: duplicate filename 'pcspkr' can not be created
[ 104.126799] WARNING: at /build/buildd/linux-2.6.24/fs/sysfs/dir.c:424 sysfs_add_one()
[ 104.126818] Pid: 2685, comm: modprobe Not tainted 2.6.24-17-generic #1
[ 104.126858] [<c01d738f>] sysfs_add_one+0x9f/0xe0
[ 104.126919] [<c01d78c8>] create_dir+0x48/0x90
[ 104.126958] [<c01d7939>] sysfs_create_dir+0x29/0x50
[ 104.127031] [<c021536f>] kobject_get+0xf/0x20
[ 104.127066] [<c0215833>] kobject_add+0x93/0x1b0
[ 104.127104] [<c02159e1>] kobject_register+0x21/0x50
[ 104.127128] [<c0281cb1>] bus_add_driver+0x71/0x1e0
[ 104.127184] [<c01507c6>] sys_init_module+0x126/0x19c0
[ 104.127229] [<c0217d97>] rb_insert_color+0xb7/0xe0
[ 104.127337] [<c013f260>] param_get_int+0x0/0x20
[ 104.127386] [<c01043c2>] sysenter_past_esp+0x6b/0xa9
[ 104.127445] =======================
[ 104.127463] kobject_add failed for pcspkr with -EEXIST, don't try to register things with the same name in the same directory.
[ 104.127488] Pid: 2685, comm: modprobe Not tainted 2.6.24-17-generic #1
[ 104.127504] [<c02158b3>] kobject_add+0x113/0x1b0
[ 104.127544] [<c02159e1>] kobject_register+0x21/0x50
[ 104.127568] [<c0281cb1>] bus_add_driver+0x71/0x1e0
[ 104.127607] [<c01507c6>] sys_init_module+0x126/0x19c0
[ 104.127637] [<c0217d97>] rb_insert_color+0xb7/0xe0
[ 104.127740] [<c013f260>] param_get_int+0x0/0x20
[ 104.127787] [<c01043c2>] sysenter_past_esp+0x6b/0xa9
[ 104.127839] =======================
[ 109.066925] lp0: using parport0 (interrupt-driven).
[ 109.389766] azt2320 01:01.01: activated
[ 109.392091] azt2320 01:01.02: activated
[ 109.397102] ALSA /usr/src/modules/alsa-driver/isa/cs423x/../../alsa-kernel/isa/cs423x/cs4231_lib.c:1451: cs4231: can't grab DMA1 1
[ 109.404002] azt2320 01:01.01: disabled
[ 109.406411] azt2320 01:01.02: disabled
[ 109.406526] ALSA /usr/src/modules/alsa-driver/isa/../alsa-kernel/isa/azt2320.c:338: no AZT2320 based soundcards found
[ 109.619984] Adding 329292k swap on /dev/sdb5. Priority:-1 extents:1 across:329292k
[ 110.396268] EXT3 FS on sdb1, internal journal
[ 113.650520] ip_tables: © 2000-2006 Netfilter Core Team
[ 115.894765] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 115.895254] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 115.897010] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 115.897781] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 119.234849] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 119.731198] ppdev: user-space parallel port driver
[ 120.034526] audit(1212698550.403:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4440 profile="/usr/sbin/cupsd" namespace="default"
[ 123.017124] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 123.547938] Bluetooth: Core ver 2.11
[ 123.550132] NET: Registered protocol family 31
[ 123.550153] Bluetooth: HCI device and connection manager initialized
[ 123.550171] Bluetooth: HCI socket layer initialized
[ 123.956894] Bluetooth: L2CAP ver 2.9
[ 123.956917] Bluetooth: L2CAP socket layer initialized
[ 124.034959] Bluetooth: RFCOMM socket layer initialized
[ 124.035963] Bluetooth: RFCOMM TTY layer initialized
[ 124.035984] Bluetooth: RFCOMM ver 1.8
[ 126.033043] NET: Registered protocol family 17
[ 129.893618] NET: Registered protocol family 10
[ 129.895910] lo: Disabled Privacy Extensions
[ 140.226173] eth0: no IPv6 routers present
[ 341.858656] snd_azt2320: Unknown parameter `port'
[ 356.683852] snd_azt2320: Unknown parameter `port'
[ 829.322245] snd_azt2320: Unknown parameter `port'
soliluna@soliluna-desktop:~$
Indice
Búsqueda
Miembros
Mapa
Eventos
Ayuda
Reglas
Banners![[newsletter]](pl_images/news_subscribe.png)
Newsletter
